Customized Assembled Three-in-one Outdoor Non-slip PVC Floor Mat
Three-in-one pvc floor mat using environmental protection of the vinyl polymer (EVA) engineering plastic block type design, combination,unlimited, installation disassembly is very convenient, and easy to maintain and clean. High quality brush, grass, pointed, the shovel, strong lodging resistance; do not fade, corrosion resistance, resistance to ultraviolet, wear-resisting, long service life.
Now, more and more people realize that to ensure the indoor cleaning, vestibular dust removal function is indispensable.
Developed countries in Europe and the usage of this kind of new products has reached more than 90%, with a waterproof dust anti-skid protection indoor cleaning and hygiene, and other functions, can also be used as winter snow removal pads hallway.
2. Performance: using imported polymer materials of environmental protection EVA and PA6 brush. Cold resistant, high temperature resistant can be used normally in the range: -30-70℃.
3. Effect: Have the waterproof, dust removal, non-slipprotection indoor cleaning and hygiene, and other functions. It can be used as winter snow foyer pad use.
4. Apply to: Hotels, office buildings, shopping malls, museums, hospitals, metro, family door of import and export, and indoor and outdoor corridor.
5. Product connection mode: block connections.
6. Product installation method: directly on the ground or grooves. Plate convex tooth connection concave ring, according to the size requirements of different places, set free. After the plate is installed, and then loaded on the hypotenuse and bevel around.
7. Features: Any combination of three ways, stitching convenient; local damage can replace them alone; easy cleaning.
Rinse with water, or vacuum cleaners in the mat surface dust, can choose neutral detergent to clean, do not use strong alkali or volatile solvent.
A. Don't use dry cleaning agent and other solvents to clean.
B. Don't use strong alkaline solution to clean.
C. Don't use cleaning solvents, such as gasoline or diesel.
We are specializing in the production of plastic mould manufacturers. The company has been engaged in the development, design and make of various types of plastic mould. Especially injection mould, extrusion mould, rubber mould and stamping mould.
We company always takes "not purse big profit, but make friends worldwide" as the objective, warmly welcome friends to visit and seeking common development.
Management & Team
We have gradually built a self-developed management pattern for several years, which is the principle of “clear assignments, specific responsibility, checked promotion, smooth cooperation and high efficiency operating.”
Technology research & Development
We have been paid attention to long-term technological layout, at all times fetching in, research and development, betaking newest technology and technique, emphasizing on technology innovation and products researching.
1. We provide mould, OEM is available "according to the customers' drawings (material can be done according to customer's requirement).
2. We improve the finished product, customers can also according to the mold production of finished products.
3. We provide one-stop service, from design, production, service, etc.
4. If you have any request can contact us.
Automobile:Autointeriorplasticcase,Auto Inner Parts, Bumper, Door Plate, Autolamp,Instrumentpanel,auto connectors ,Electrical switch; Car Gear, Complete sets of Motorcycle parts and so on.
Electronic: Wirelessreceiver plastic part,3G/4G Modem Wireless Network Cards, USB Connector ,USB housing,Mobile phone plastic part,remote control,key-press;
Mechanical: Motor support plastic part,Pump plastic part,mower plastic parts
Household:Fashioncup,Juicecup, some small plastic parts;
Home appliance:such as TV front cover, TV rear cover, Display cover, Air-conditioner or Refrigerators plastic parts, Washing machine part.
Q: Are you trading company ormanufacturer?
A: Juxing mould is a manufacturer.
Q: What about the leading time?
A: About 25 days after down payment.
Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance.
Payment>=1000USD, 50% T/T in advance, balance shippment.
If you have another question, pls feel free to contact us.
Q:How about the packing?
A: Wooden case for packaging.
Q:Can I have our own logo on the pvc floor mat?
A:That's ok to have your own logo on the pvc floor mat.
Please contact with us to make sure the detailed things before placing order.
Contact: MerryCompany:Qingdao Juxing Machinery & Mould Co., Ltd.
Tel: +86-15253216899Fax: +86-0532-82231127Skype:juxing_mouldTradeManager: cn220049738Website:http://www.mj35.comAddress: 23, Juxing Road, Nanguan Industrial Zone,Jiaozhou, Shandong Province, China