Factory Soft PVC Coil Mat Plastic Spinneret Extrusion Mould

Factory Soft PVC Coil Mat Plastic Spinneret Extrusion Mould

Product- mould-extrusion mould Factory Soft PVC Coil Mat Plastic Spinneret Extrusion Mould Cast Film Moulds 1. Hangers-style structure. 2. Both sides of the moulds used of ejector and pull screw, the mould lip can be bent to adjust the gap. 3. All sides of the mould plated chromium and used...
Chat Now

Product Details

Product- mould-extrusion mould

Factory Soft PVC Coil Mat Plastic Spinneret Extrusion Mould

Cast Film Moulds

1. Hangers-style structure.

2. Both sides of the moulds used of ejector and pull screw, the mould lip can be bent to adjust the gap.

3. All sides of the mould plated chromium and used high-strength bolts with 12.9 grades.

4. The heater make of nice stainless can be control heating.

5. Production is 0.015-1.5mm film.

6. Suitable for: PE, PA, PP, PET, ABS, PS, etc.

7. Mould width: 400-3000mm.

Advantage

1. Ventilation and ventilation: The unique spinning structure makes it breathable and breathable.

2. Can be cleaned: ventilated and ventilated structure, convenient for disinfection and cleaning, no bacteria, environmental protection, corrosion resistance, no bacteria.

3. Durability, overall molding. The mesh structure is not subject to local stress and will not be deformed for long-term use.

4. After aging, it can be recycled and re-formed, or recycled for other purposes, environmentally friendly and non-polluting.

Inquiry