Calender PVC Sheet Plastic Extrusion Mold
1. Mould structure: hanger-style structure of plate mould.
2. In the mold lip can be continuous without blocking the flow surface, equipped with the small interval adjustment screw on the bounce up and down of the pressure of the resin and metal work, the mould lip can be bend to adjust the gap.
3. With an activity mould opening, can be coarse.
4. With 90 degrees damping bar can be adjusted to the stream.
5. Production 0.5-5mm thickness plate and sheet products.
6, Suitable for production of 1-3mm waterproofing rolls.
7. Apply to: PE, PA, PP, PET, ABS, PS and other materials.
8. Mould width: 400-3000mm.
Product material, product width and product thickness, etc.
2. Place order
According to your own design or choose our design.
3. Mould design
We will communicate & exchange the opinion with you during making a drawing.
4. Mould process
Provide photos for customer show them tooling process.
5. Sample confirm
Send the samples to our client's confirmation. If not satisfied by the customer, modify mold.
6. Delivery mould
Qualified samples after, arrange the shipment.
A: Juxing mould is a manufacturer.
A: mould 1set, heater 1set, toolbox 1pc, plug 2 pcs,
heater ring 2 pcs, spanner each 1 pc, instruction manual 1 pc.
Q: Can I have our own logo on the products?
A: That's ok to have your own logo on the products. Please contact us to make sure the detailed things before placing the order.
Company: Qingdao Juxing Machinery & Mould Co., Ltd.
Address: 23, Juxing Road, Nanguan Industrial Zone,
Jiaozhou, Shandong Province, China